From Additional Settings, select Advanced Settings.
XBOX WIRELESS MAC ADDRESS PS3
From the PS3 main menu screen, follow these steps: PlayStation 3 : To find the MAC address of your Sony PlayStation 3 you will need the Network Adaptor connected to the PS. While you are at this screen, make note of the MAC address at the bottom. Run the Xbox Live Test and see if your NAT is "Open.At the "Advanced Broadband Settings" screen, make sure "Automatic" is selected. Turn off the router then wait 10 seconds, and turn it back on. It must say "Open."įind "DMZ Settings" in the "Firewall" menu of your Belkin setup page.Įnter "120" under the section "IP Address of Virtual DMZ Host" so that your IP address is "192.168.2.120" and then click "Apply Changes." Run Xbox LIVE Test to check NAT settings. Turn off the router and wait 10 seconds, and then power it back up again. Locate the UPnP in advanced settings at the bottom left of the page.Ĭlick "Change" and then click the "Enable UPnP on Radio" button. Run Xbox LIVE Test to ensure your NAT settings are "Open." Belkin RoutersĬlick "Start," "Internet Explorer." Visit your router's setup page at "," and then click "System Settings." Click to remove a check from "Filter Anonymous Internet Requests," and then save settings. Click "Save Settings."Ĭlick "Security" and click "Firewall" from your router's setup page. Open your router's setup page and click "Applications and Gaming" then "DMZ." Click to "Enable DMZ." The "Source IP Address" box now shows "Any IP Address."Ĭlick on "DHCP Client table," and then look for your Xbox MAC address on the list. Reboot the Xbox and then check the "System Settings" for the same IP address that you reserved. Open "My Xbox," then "System Settings, and "Network Settings." Set your IP address to "Auto." Click "Network Setup Menu," and then click "DHCP Reservation." Click on "Reserve." You can manually reserve an IP address by typing in the MAC address of your Xbox. Click "Start," "Internet Explorer" on your computer and type in the address for your router's setup page.
Turn on your Xbox and connect it to your router. Reboot the router and run Xbox LIVE Test and see if the connection is "Open." Linksys Visit your router's setup page then click "WAN Setup." Type the IP address in the "Default DMZ Server" area.Ĭlick to check the "Default DMZ Server" box, and then click "Apply" and save the changes. Turn on your Xbox 360 and navigate to "My Xbox," then click "System Settings," and then go to "Network Options." Click "Edit Settings" and then "Advanced Settings." Xbox shows your "IP Address." Write this sequence down. Select "System Settings," then "Network Settings," and "Test Xbox Live Connection." Look at your NAT status. Select "My Xbox" from the main menu on the Xbox.
Reboot your router as well as the Xbox 360. Turn on UPnPĬlick "System Settings" and then set your Xbox's IP address to "Auto."Ĭlick "Start," "Internet Explorer." Type in your router's setup page address in your browser and hit "Enter." For Netgear, visit "192.168.0.1." For Linksys, go to "192.168.1.1," and for Belkin G routers, go to "192.168.2.1" to load the settings in your browser.Ĭlick "Advanced Settings" and then "UPnP Settings." Click to turn UPnP "On," and then save your settings. Save the new settings to your router, and then reboot your Xbox 360 and visit your dashboard to see that it uses the new IP address. Name your Xbox device, and then click "Add." Type in the MAC Address from your Xbox LIVE's "Advance Settings." A page opens with entry boxes for DHCP address and MAC address.Įnter the chosen address from the "DHCP Address Range." In the next box, type in the MAC address from your Xbox. Click "LAN IP Setup" on the router setup page.
0 kommentar(er)
